RACCORDA3D · Free sample
========================

IMPORTANT: the print result depends on your printer, material and settings.
The values below are the ones we print and test our parts with. If your printer is calibrated
differently, the fits may come out tighter or looser.

THE PART
Fitting with a 30° bend: one end goes into a pipe with a 32 mm inside diameter (anti-slip rings),
the other end slips over a pipe with a 35 mm outside diameter. It connects a household vacuum hose
to the accessories of wet & dry shop vacuums.

PRINTING
- The file is already placed on the bed the right way up: no supports.
- PETG, 0.2 mm layers, 0.4 mm nozzle, at least 4 perimeters, 20% infill.
- A calibrated printer matters: if diameters come out wrong, the fit changes too.

PERSONAL USE
The file is a gift for personal use: you may print it for yourself. You may not resell it or sell prints of it.

A custom fitting for your own pipes: https://raccorda3d.com/en/
